Part # F1-H-131
15-20 Ford F150 Off Road Fiberglass Hood
$400.00
Part # F1-H-131
15-20 Ford F150 Off Road Fiberglass Hood
$400.00
This hood was inspired by press release photos of the 2017 Raptor. It consists of an outer and inner shell for increased strength and rigidity. This hood will work with stock Ford F-150 fenders and grill. We also incorporated hinge bolts so you can rebolt to the factory hinge location.
|
Bolts to factory hinges Requires hood pins will not use factory use latch |
R |
Related products
-
RAP-O-21
2017-2020 Ford Raptor Off Road Fiberglass One Piece
$1,500.00
Visit product page →Wanting to run Long Travel and 40" Tires on your Gen 2 Raptor? This is the way to go! This is the only One Piece on the market with a pushed forward wheel base to allow the 40" tire to clear the headlights at full bump. This One Piece uses factory headlights and does require a OEM Raptor Grill.
Specs:
- 92" track width
- Setup for 40" Tires
- Headlights and grill pushed forward 3"
- Comes completely off the vehicle(lift off) or tilt front end (additional cost)
- Some Fabrication Required for Install
- Headlights not provided
- Grill is not provided
- Includes One piece, Driver and Passenger Mini Fenders
- Parts come in White Gel Coat
- Fits 2015-2020 F150/Raptors
-
Part # F1-F-131
15-17 Ford F150 3" Bulge Off Road Fiberglass Fenders
$400.00
Visit product page →Our 15+ Ford F150 fenders are a great addition to trucks with lift kits or mid travel kits. This is a simple bolt on fiberglass fender. The holes are pre-marked and you will have to drill your own holes in the fiberglass. The wheel well is larger then factory so stock wheel liners will not work. If you would like wheel well liners you will have to custom create your own. The fiberglass fenders will work with stock hood and stock headlights
ALL PARTS COME IN A WHITE GEL AND NOT PAINTED.
ALL PARTS HAVE TO BE MOUNTED BEFORE ANY PAINTING TAKE PLACE.
- Price is for the pair Right and Left side
- Bolts back to factory locations
- Pre-marked holes. (Drilling involved)
- 3” flare wider then stock per side
- 2” larger wheel well opening
- Works with stock hood and bumper
- Some trimming involved with bumper to allow larger wheel well
- Stock wheel well liners will not fit. (custom extensions will need to take place)
-
Part # F1-F-134
15-17 Ford F150 5" Bulge Off Road Fiberglass Fenders
$400.00
Visit product page →Our 15+ Ford F150 fenders are a great addition to trucks with long travel kits. This is a simple bolt on fiberglass fender. The holes are pre-marked and you will have to drill your own holes in the fiberglass. The wheel well is larger then factory so stock wheel liners will not work. If you would like wheel well liners you will have to custom create your own. The fiberglass fenders will work with stock hood and stock headlights
ALL PARTS COME IN A WHITE GEL AND NOT PAINTED.
ALL PARTS HAVE TO BE MOUNTED BEFORE ANY PAINTING TAKE PLACE.
- Price is for the pair Right and Left side
- Includes Valance Pieces (Left and Right)
- Bolts back to factory locations
- Pre-marked holes. (Drilling involved)
- 5” flare wider then stock per side
- 2” larger wheel well opening
- Works with stock hood and bumper
- Some trimming involved with bumper to allow larger wheel well
- Stock wheel well liners will not fit. (custom extensions will need to take place)
-
Part # F1-B-131
15-20 Ford F150 Off Road Fiberglass Bedsides - 5.5 Bed
$550.00
Visit product page →These besides are designed for the crew cab trucks only and will provide the same size flare of a stock Ford Raptor. Cutting and drilling is needed to mount these parts to the vehicle.
Prices are for the Pair
Accepts:
-Factory tail light, -Factory tailgate
Modifications:
- Fiberglass does not taper for prerunner style bumpers.
- Wheel well supports will need to be modified for new larger and wider bedsides (parts not included)
-For gas filler location Possible extension of the stock filler hoses is needed
